Are skate shoes good for walking?

Generally speaking, there is no huge difference between skate shoes and normal walking shoes. But we are not here to give you the general info, are we? For professionals and more serious skaters and runners – both shoes serve a different purpose. Some people can have serious issues with skate shoes if they use it can-you-walk-in-skate-shoesfor walking for long distances.

The sole of the skate shoes are flat and are not built for continuous thumping. Even though the insides of the shoe is nicely padded up but it is still not considered an ideal comfort for walking or running.

Do skate shoes make a difference?

This is a tricky question as someone who skates occasionally – like once or twice a week will have a different opinion about skate shoes. A pro is going to answer this question a little differently. We are going to cover both angles.

For an occasional skateboarder, skate shoes won’t make a huge difference. He is likely to not have an idea about what the right grip feels like on the skateboard. How it can help manoeuvre and learn new tricks. He probably doesn’t know how to skate correctly.

If you are just an occasional skater than skate shoes won’t make that much of a difference. For professionals and more serious people out there, skate shoes are a must. It helps in the long run in avoiding injuries and learning new tricks quicker.

Are skate shoes bad for your feet?

What we have to realize here is the fact that skate shoes are specialty shoes. They are designed keeping in view the peculiar requirements of the skateboarders.

Just like medicines – we are only allowed to take them as per the physician’s instruction. A medicine aimed to fight against fever will only help a patient with fever. It may be bad for someone with a cough or other medical conditions. Similarly, skate shoes are designed for skateboarders. They are not very useful for them. However, if you use them as your everyday casual you might feel fatigued. Similarly, you can’t wear these shoes as an alternative to your running or walking shoes because they are simply not built for that.

So, if are looking for an answer to the above question – we would say YES and NO! It all comes down to the fact that how are you using them. For skating purpose they are just perfect but for everyday usage, yes they might not be the ideal choice!

Are skate shoes non slip?

The outsole of the skate shoes is generally made up of rubber, which more slip resistant than other materials especially when exposed to the wet or greasy floor. Since the skate shoes provide excellent grip on the slick floor they are also used by workers in the kitchen.

When it comes to skateboarding – these shoes provide excellent grip. More than the anti-slip properties, skateboarders need their shoes to be grippier and this is what the rubber outsole provides.

Since the best quality skate shoes are anti-slip, most people also wear them to work. Besides providing safety, we must say that skate shoes also look pretty trendy. Having said that, we also advise our readers that these shoes are made to support wearers standing all day every day. For a few hours, yes they may withstand but anything above 5 hours in a single day is likely to put your legs in strain. So, before you wear your skate shoes to work, just make sure that is it really suitable for the type of work you do?Covering more of its anti-slip property, let’s find out what makes them so grippy. Many of us think that it’s the material used in their making, many say it’s the design – we say it’s the combination of both.

The outsole of skate shoes are grippier – we already know that: let’s find out what makes them so grippy. The outsole is that external part of the show that comes directly in contact with the surface. In skateboard shoes, this part is made up of soft rubber and is flat all the way. The soft rubber sole, flat in design makes sure that you don’t slip or fall on the wet or greasy surface. On the other hand, a harder, curvier outsole of a normal shoe is highly unlikely to provide you with the support you need on more demanding surfaces.

Another thing that makes our skateboard shoes anti-slip as we know them is the special design of the shoes and the sole. Many people tend to get confused between skateboard shoes and basketball shoes. They have a similar design but basketball shoes are not that slip-proof. If you are a basketball fan, we are sure you must have seen players slipping in court and suffering serious injuries. This happens when they step on a wet patch in the court. This is the reason why NBA employs people whose only duty is to keep the basketball court dry and clean during the game. The basketball shoes (although similar in design) have a slightly curvier outsole and the rubber used is a little soft too. This adds more stability against harder impacts but makes the shoes more prone to slippage.

Skateboard shoes, on the other hand, provide excellent protection against slippages. All because of the flatter and simpler design of the outsole. The lines on the sole of skateboard shoes are also broader and more visible – providing more friction on impact.

If you liked the article, please leave your feedback.

How to repair Skate Shoes properly?

Let’s face it, we don’t like repairing our stuff, especially when it comes to doing it ourselves. Skate shoes are usually expensive and are often subject to wear and tear (not if you’re wearing them casually only of course).

shoes-on-a-skateboardYou might find a hole in the sole or the sides coming off of your skate shoes quicker than ordinary sneakers. Rather than rejecting them and looking for a new one, there is another course to adapt to as well. There are some easy ways in which you can fix your skate shoes and use them more!

How do you fix a hole in your shoe?

A hole in the shoe is probably the most common repair needed for skate shoes. Here is how you can easily fix and extract some more life out of your shoes.

1- The first step is to check the shoes fofix-hole-skate-shoer any dirt, water, grease or anything. Just make sure that the shoe is neat and clean, especially the surface of the sole.

2- Make sure that you seal all holes in the shoe from inside with a duct tape or anything similar. This step is important as you can’t apply the adhesive without sealing the hole from inside.

3- It is time to seal the hole from the outside. Make sure you select a proper adhesive for that.

4- Spread the glue in the hole. We know that it is hard to properly apply the adhesive as it is very sticky. To solve this problem, we advise our readers to make use of ice to apply and spread the adhesive where needed.

5- Leave the shoe for a few hours untouched. And once the adhesive is completely dry and settled in, remove the duct tape from inside.

6- If there is any extra material that needs to be removed, you can do that with scissors or any other type of a cutter.

What can you use shoe goo for?

Shoe goo is ideal for almost any type of shoe repair. Below are some of its uses…

1- Can used to attach soles back to the shoes.

2- Reattaching any leather or rubber part of shoes.

3- Patching holes in sole or any other part.

4- It can also be used to make normal hiking and walking shoes grippier.

5- Many people use it to make shoes like soccer and golf more resistant to water.

6- It can also be applied on the tip of the soccer shoe to make it more durable

Above are some of the applications of shoe goo in fixing shoes. Other than that you can use it to for almost any kind of repairs to furniture, water tanks, etc.

How to clean skate shoes

repair-skate-shoesThe best Skate shoes on the Market look great when they are clean and tidy. Having said that, it is not easy to take care of your shoes and always keep them in top shape but if you are a pro who also wants to look good in the skate park then this is something that you can’t ignore.

Skate shoes that are regularly used for skating are more likely to get dirty, lose color and what not. In this question we will try to explain the basics of cleaning your shoes.

1- Choosing the right cleaner:

It all starts with finding the right cleaner for your beloved skate shoes.So, if you want to give your old shoes that fresh, out of the box look then you need to do some work. To clean the white part of your shoes you can make use of variety of household fluids like.

● Bleach
● Acetone (simply a nail polish remover)
● Alcohol
● Glass cleaner
● Hydrogen peroxide
● Lemon juice
● Baking soda + water

2- Applying the cleaner:

Some of these materials like bleach or acetone needs to be applied outside (in open air) as they have this strong pungent smell and ability to cut through colors.

Set your shoes and the cleaning agent on a firm surface and apply the material on the white part of your shoes with the help of a shoe brush or an old tooth brush.

3- Covering the colored part:

When applying the cleaning agent, it is best to cover the colored part of the shoe so that it is not exposed to the cleaning agent. Cover the part of the canvas where it meets the rubber with a tape or anything, which you can later remove it easily. Some people think that their shoes would look cooler with stains in the canvas – if you are one of those, you don’t need to worry about covering the sheet.

4- Cleaning with water

Once you are done with cleaning and rinsing the white on your skate shoes it is not time to swipe and clean it with water. For this, take a clean towel, soak it with water and then wipe on the surface of the leather.

5- Cleaning the canvas

For cleaning the upper part of the shoe, the canvas – we advice our readers to wash it normally with cleaner detergent, a toothbrush and some water.

Keep the shoe to dry for a few minutes and what you will see is a brand new pair of skate shoes.

If you liked the article, please leave your feedback.